Hackers are breaking in through office camera systems. Here’s how to lock yours down

Lock down your office cameras

Editor:

·

Your security cameras are supposed to protect your office. This month, for some businesses, the camera system became the way in. Between November 8 and 10, the security firm Huntress saw attackers break into 13 organizations through camera software made by GeoVision that was reachable from the internet. Around the same time, Axis, another big camera maker, fixed a weakness in its video software that could expose the passwords for every camera it manages. If your office has cameras that you can watch from your phone, this is worth 30 minutes of your week.

At a glance

  • Huntress reported attacks on 13 organizations through GeoVision camera software that was open to the internet.
  • The attackers tried to switch off Microsoft Defender and then installed a crypto miner, a program that quietly uses your computer’s power to make money for someone else.
  • Axis released AXIS Camera Station Pro 6.20 in late October to fix a flaw in how it protects saved backups. Axis says it is not aware of anyone using this flaw in attacks.
  • The common thread: camera software is a computer on your network, and it needs the same care as any other computer.

What happened with GeoVision

GeoVision is a Taiwanese company that makes cameras, recorders, and access-control gear. Many offices run its software on a Windows PC to record and view video.

Huntress, a security company that watches over many small businesses, says the attacks came through that software on machines that were exposed to the internet. Once inside, the attackers ran commands with full control of the PC. They tried to turn off Microsoft Defender, the antivirus built into Windows. Then they set up a crypto miner and a task that kept restarting it every 15 minutes.

A crypto miner may sound harmless next to ransomware, but it is not. It slows the PC, runs up power use, and proves a stranger has full control of a machine on your network. That same access could be used for something worse.

Huntress has not said exactly which weakness was used, so this story is still developing. Its advice is clear, though: do not leave camera software open to the whole internet.

What Axis fixed

AXIS Camera Station is software many businesses use to run Axis cameras. Axis found that its database backups were not protected strongly enough. Someone who gets hold of a backup file could pull out saved logins, including camera passwords.

Axis fixed this in AXIS Camera Station Pro 6.20. There is a catch. Backups made before the update are still weak, and the update itself makes one more old-style backup for recovery. Axis says to delete all of those backups and change the passwords stored in the software. Axis also lists the older AXIS Camera Station 5 as affected, and the fix was released only for the Pro version, so ask your installer about upgrading if you still run version 5.

Steps you can take this week

  1. Find out what you have. Write down the brand of your cameras and recorder, and the name and version of any viewing software on your PCs.
  2. Check how you watch from outside. If you can see your cameras from home, ask how. If the answer is “we opened a port on the router,” that means the system is reachable by anyone on the internet. Huntress recommends putting it behind a VPN (a private, encrypted connection) or only allowing a short list of trusted addresses.
  3. Update the software and the recorder. Install the latest version from the maker. If you run AXIS Camera Station Pro, move to 6.20 or newer.
  4. Clean up old backups. Axis users should delete backups made before 6.20, plus the recovery backup the update creates, then change the stored passwords.
  5. Change default and shared passwords. Give each camera system a long, unique password. Remove logins for people who no longer work with you.
  6. Look for warning signs. A camera PC that suddenly runs hot, slow, or loud, or shows Windows Security turned off, deserves a closer look. If you find something, unplug it from the network and call for help before you delete anything.
  7. Keep cameras on their own network. If the camera system is ever broken into, a separate network keeps the attacker away from your office PCs and files.

CISA, the federal cybersecurity agency, puts it simply: keep software updated, turn on automatic updates where you can, and replace gear that no longer gets security fixes. Camera systems are often left out of that routine because they “just work.” That is exactly why attackers like them.

The bottom line

Cameras and recorders are computers, and they need updates, strong passwords, and careful remote access like any other computer. The fixes are not hard, but they are easy to forget. Take a few minutes this week to check how your system is set up and when it was last updated.

If you’d like a hand checking or securing your camera system, HDT can help. Call us at (954) 507-3773.

Sources: Huntress: GeoVision camera software exploited to drop XMRig; Axis security advisory for AXIS Camera Station Pro; NIST National Vulnerability Database entry; CISA: Update Business Software.

Comments

Join the HDT community to add comments

Enter your name and email and we’ll send you a sign-in link. No password needed. You’ll also get an email when we publish a new post, and you can unsubscribe anytime.